Boat wash
Our most frequently used service. All accessible parts of the vessel are washed with a mild detergent to remove dirt and grime. Non-Skid surfaces are treated with a teflon based cleaner and sealer.

Full Interior clean
Berths, heads, saloon and galley are all thoroughly cleaned, walls and surfaces are polished, carpets are vacuumed. Cockpit area seats, floor, glass, dashboard cleaned.

Carpet wash & stain removal
Carpets are steam cleaned, stains are treated with a stain remover.

Scotch guard carpet & fabrics
All compatible carpets and fabrics are treated with scotch guard stain repellent. Leather is treated with a cleaner and moisturizer. Vinyl protectant is applied to all vinyl surfaces.

Mold & mildew treatment
Mold and mildew is removed and an anti-mold protectant is applied.

Engine and Bilge clean
Engine and bilge cleaned with degreasers and / or steam. Oil and dirt residue is removed from the vessel as to avoid discharge into water.

Canvas clean & waterproof
All canvas is cleaned and a UV stabilized waterproofing solution is applied.

Bottom power wash (out of water service)
Bottom on vessel is power washed. Vessels with no bottom paint are cleaned with on-off.

Shore power cord/bumpers clean
Shore power cord and bumpers are cleaned and a reconditioning / protection solution is applied.

Hull detail (out of water service/or access required)
Entire hull (from rub rail down) is compounded with either a light duty cleaner, medium duty or heavy duty compound depending on oxidization. Hull is then washed and Fleetwax, a heavy duty paste marine carnauba wax is applied by buffer to melt the wax into the gel coat thereby sealing it. Most surface scratches and scuffs are removed with this service.

Above deck detail
Entire deck,(from rub rail up, excluding non-skid surfaces) are compounded with either a light duty cleaner, medium duty or heavy duty compound depending on oxidization. Hull is then washed and Fleetwax, a heavy duty paste marine carnauba wax is applied by buffer to melt the wax into the gel coat thereby sealing it. Non-skid surfaces are cleaned and a teflon solution is applied for protection and ease of cleaning. Most surface scratches and scuffs are removed with this service.

Fly bridge detail
All accessible parts of the fly bridge are compounded with either a light duty cleaner, medium duty or heavy duty compound depending on oxidization. Hull is then washed and Fleetwax, a heavy duty paste marine carnauba wax is applied by buffer to melt the wax into the gel coat thereby sealing it. Most surface scratches and scuffs are removed with this service.

115ft Crecent at James Creek Marina, DC